Electrostatic coating refers to a process that uses charged particles in order to paint workpieces more efficiently. The equipment used for this kind of painting atomizes and statically charges the atomized paint as it emerges from the spray head. The paint is usually driven by a centrifugal force as it leaves the equipment. The charged paint seeks the grounded metal, wrapping around it regardless of shape. For the best electrostatic painting Denver is the best location to check out.
Complex applications comprise a conveyor belt along which the workpiece travels into a paint tack or paint booth. While in the booth, paint is sprayed over the substrate, or it is dipped into the paint. There is a powder recovery module in the booth to remove overspray coating up to 95 percent efficiency or more. The conveyor then moves the workpiece down for curing in an oven.
There are several factors in this process that make it better in comparison to traditional painting. First, the presence of a recovery unit for recovering overspray helps to avoid wastage of paint. Costs can further be cut by using an automated version of the equipment even though there are manually-operated models.
The work of the recovery unit is to suck paint particles that do not adhere to the substrate being painted. These particles hung in the air and are sucked back. It is important to ground all components of the equipment before starting the painting process and this is one of the major disadvantages of the process. Without properly grounding these components, there is the risk of a massive buildup of static charges in the system. This may cause damage to the painted substrate such as arcing.
It is important to clean all components that make up the system thoroughly before use. The reason for doing thorough cleaning is to avoid causing a shock to the people around the system. Thorough cleaning also ensures that coat achieved is of high quality. Most models of this product are usually very costly when compared to other painting appliances. However, lower materials and labor costs among other factors absorb the high cost very over a short time.
Much preparation is needed in this process before the actual painting. Removal of debris is the first process of preparation, and it is important to ensure that materials such as debris, graffiti, dust, mold, and old paint among others are removed completely. One of the best ways of removing surface debris is through sandblasting. To attain better adhesion, one should sand the surface of the workpiece.
After sandblasting and sanding, the surface needs to be wiped thoroughly using various kinds of solvents and/or degreasers. There is a wide range of solvents and degreasers in the market that one can use for this purpose. In case there are some parts of the workpiece that do not need to be painted, it is important to mask them before starting to work.
The results attained can further be improved through priming the substrate. Similarly, there are various primers available on the market. One needs to unmask and replaced any removed parts after the process is complete. Thorough cleaning should then be done to put an end to the process.
Complex applications comprise a conveyor belt along which the workpiece travels into a paint tack or paint booth. While in the booth, paint is sprayed over the substrate, or it is dipped into the paint. There is a powder recovery module in the booth to remove overspray coating up to 95 percent efficiency or more. The conveyor then moves the workpiece down for curing in an oven.
There are several factors in this process that make it better in comparison to traditional painting. First, the presence of a recovery unit for recovering overspray helps to avoid wastage of paint. Costs can further be cut by using an automated version of the equipment even though there are manually-operated models.
The work of the recovery unit is to suck paint particles that do not adhere to the substrate being painted. These particles hung in the air and are sucked back. It is important to ground all components of the equipment before starting the painting process and this is one of the major disadvantages of the process. Without properly grounding these components, there is the risk of a massive buildup of static charges in the system. This may cause damage to the painted substrate such as arcing.
It is important to clean all components that make up the system thoroughly before use. The reason for doing thorough cleaning is to avoid causing a shock to the people around the system. Thorough cleaning also ensures that coat achieved is of high quality. Most models of this product are usually very costly when compared to other painting appliances. However, lower materials and labor costs among other factors absorb the high cost very over a short time.
Much preparation is needed in this process before the actual painting. Removal of debris is the first process of preparation, and it is important to ensure that materials such as debris, graffiti, dust, mold, and old paint among others are removed completely. One of the best ways of removing surface debris is through sandblasting. To attain better adhesion, one should sand the surface of the workpiece.
After sandblasting and sanding, the surface needs to be wiped thoroughly using various kinds of solvents and/or degreasers. There is a wide range of solvents and degreasers in the market that one can use for this purpose. In case there are some parts of the workpiece that do not need to be painted, it is important to mask them before starting to work.
The results attained can further be improved through priming the substrate. Similarly, there are various primers available on the market. One needs to unmask and replaced any removed parts after the process is complete. Thorough cleaning should then be done to put an end to the process.
About the Author:
Find an overview of the advantages of using electrostatic painting Denver services and more info about a reliable service provider at http://www.denveronsitepainting.com/services.html today.
Aucun commentaire:
Enregistrer un commentaire